News:

Login  |  Register

Author Topic: Nutty's Craftworld Eldar  (Read 785 times)

0 Members and 1 Guest are viewing this topic.

Offline Nutty

  • Newbie
  • *
  • Posts: 45
  • Country: nl
  • I *LOVE* 40k Online!
  • Armies: Craftworld Eldar, Imperial Guard, Tau
Re: Nutty's Craftworld Eldar
« Reply #20 on: August 30, 2019, 05:05:01 AM »
Thanks Dread, paint hasn't realy been flying lately due to the weather and videogames, but I'm sure I'll get back into the swing of things soon enough. If I had went with a custom craftworld I would still be painting guardians in test schemes.. it takes me forever to come up with something I like. I might design a craftworld for these guys at some point (mainly because I don't like the Iybreasil rune all that much) but I quite like to colours. It's going to be a bit of challenge to tie in some of the aspects in with the rest of the army, but I'll work that out when I get there.

@mage: I'm using diametrically polarized(?) magnets and they do a good job keeping the guns from drooping, but there is a bit of room around the magnet and the original mounting point:




This causes it to sit a little crooked unless you mush the magnets, on the turret and gunshield, into the slot. It can be done, but than I risk breaking the magnets of when swithing weapons. A tiny bit of putty should allow the magnets to sit flush whilst still having enough 'pull' to keep everything in place. I ordered some thicker (3mm as opposed to the 2mm I'm using now) magnets for future vehicles, and those will fill up more of the hole and (hopefully) eliminate the problem.
« Last Edit: August 30, 2019, 05:41:02 AM by Nutty »

Offline Nutty

  • Newbie
  • *
  • Posts: 45
  • Country: nl
  • I *LOVE* 40k Online!
  • Armies: Craftworld Eldar, Imperial Guard, Tau
Re: Nutty's Craftworld Eldar
« Reply #21 on: September 12, 2019, 04:55:35 PM »
Progress!



It is starting to look like an (very small) army.

Offline magenb

  • Aspect Warrior
  • Senior Member
  • ****
  • Posts: 1654
  • Country: au
  • I *LOVE* 40k Online!
Re: Nutty's Craftworld Eldar
« Reply #22 on: September 12, 2019, 06:00:40 PM »
Looking good, keep it up Nutty.

Offline Myen'Tal

  • Lazerous Penguin
  • Senior Member
  • *
  • Posts: 1761
  • Country: 00
  • Armies: Deepkin & Treefolk
Re: Nutty's Craftworld Eldar
« Reply #23 on: September 14, 2019, 03:14:17 PM »
Awesome start, Nutty!!!

Loving the cohesive look you've achieved across your forces so far.

Are you looking forward to any new eldar models in Phoenix Rising?
“Evil is relative…You can’t hang a sign on it. You can’t touch it or taste it or cut it with a sword. Evil depends on where you are standing, pointing your indicting finger.”
― Glen Cook, The Black Company

Offline Dread

  • Warlock
  • Senior Member
  • ****
  • Posts: 1857
  • Country: us
  • Voidraven, the stone skipping across the universe.
  • Armies: Eldar, DE, Harlis, GK, Necrons, DW, BL
Re: Nutty's Craftworld Eldar
« Reply #24 on: September 14, 2019, 03:59:51 PM »
 8) great stuff Nutty. Color choice is spot on. You've got a great start, looking forward to more.
"Burning thru the universe in search of peace only brings more war. Peace is an illusion, war is reality, that is the way of things"

                            Farseer Gol'Istria of    the Morea Nebula craftword

01000101 01101100 01100100 01100001 01110010 00100000 01010010 01110101 01101100 01100101 00100001

Offline Nutty

  • Newbie
  • *
  • Posts: 45
  • Country: nl
  • I *LOVE* 40k Online!
  • Armies: Craftworld Eldar, Imperial Guard, Tau
Re: Nutty's Craftworld Eldar
« Reply #25 on: September 14, 2019, 06:07:51 PM »
yeah I got into Eldar just in time for the new goodies :)
I'm looking forward to new models; it would be cool to see some updates in the range, I do like most of the aspect warriors we have but some are starting to show their age.

Untill they do I'll just keep chipping away at my current pile. I'm working on some rangers now; I came across a box of 5 for a good price.. so I couldn't resist.

Offline Nutty

  • Newbie
  • *
  • Posts: 45
  • Country: nl
  • I *LOVE* 40k Online!
  • Armies: Craftworld Eldar, Imperial Guard, Tau
Re: Nutty's Craftworld Eldar
« Reply #26 on: October 11, 2019, 07:52:35 AM »
My Eldar had their maiden game this week.  :)

I played a 1k game against the newest member of my gaming club, and since he is new to the game I wasn't to worried about list-building. So I brought everything that had paint on it, plus a few units to fill out the point. In the end it looked like:

--- Ulthwé Battalion ---

- farseer w/ witchblade
- warlock w/ witchblade

- 20 guardians
- 4 Dire Avengers + exarch w/ 2 catapults
- 5 rangers

- 4 banshees + exarch w/ executioner

- 1 Vyper w/ starcannon

- 1 Fire Prism
- 1 Falcon w/ brightlance & Crystal Matrix

- 1 Wave Serpent w/ twin Shuriken Cannon


I figured that would give me the chance to try some different units, and make for a interesting fight vs a new player.

Since he told me he had a Deathguard army I assumed he would bring the DG half of the starterset plus some extra units.. but I was quite wrong.

His list looked like:

--- Deathguard Outrider Detachment ---

- 1 Daemon Prince
- 1 Lord of contagion (termie lord with a big scythe)

- 3 blight haulers w/ multi-melta & Missile launcher
- 1 bloat drone w/ fleshmower
- 1 bloat drone w/ 2 plague-spitters
- 1 bloat drone w/ 2 plague-spitters


It was a pretty rough match up for me and I struggled to get through all those T7 Nurgle daemon engines. But the guardians deploying from the webway wrecked the daemon prince with a psychic support from the farseer and warlock on T2. After that they kept the drones occupied for two turns with a little help from the celestial shield strategen, which bought my other units some time to whittle away at the daemon engines. But in the end we tied on objectives killpoints with my Falcon and Vyper playing keep away with a drone, hauler and the lord of contagion.

I also painted up my finecast rangers; and the first one broke on the way to the game...





edit: these pictures looked a lot better on my phone.. I'll have another shot at it when the light is a bit better.

« Last Edit: October 11, 2019, 07:54:55 AM by Nutty »

Offline dog_of_war

  • Aspect Warrior
  • Full Member
  • ***
  • Posts: 829
  • Country: ca
  • Armies: Orks, Chaos Space Marines, Eldar, Dark Eldar
Re: Nutty's Craftworld Eldar
« Reply #27 on: October 11, 2019, 02:53:58 PM »
Damn that fine cast. It's just a terrible medium to make sculpts out of. A pin vise should be able to drill out a hole on both ends and allow you to insert a pin to give your glue support.

Sounds like a pretty tough match up. Having a battalion gave you the advantage with command points, but he brought some pretty tough cookies there.

Did your guardians have a weapons platform. If so, what was it armed with?

Offline Nutty

  • Newbie
  • *
  • Posts: 45
  • Country: nl
  • I *LOVE* 40k Online!
  • Armies: Craftworld Eldar, Imperial Guard, Tau
Re: Nutty's Craftworld Eldar
« Reply #28 on: October 12, 2019, 08:40:46 AM »
A pin will help keep it in place for sure, but it's frustrating that it broke the first time I packed them up.

The match-up was pretty rough; I didn't expect someone that only played a few battles to show up with a list like that; but it turns out it's his entire DG collection. The extra CP was nice to have and it did allow me to try some different strategems.

I didn't give my Guardians a weapon platform; I only have a metal one with a scatter laser on it. It also worked out easier pointswise.  ;)


Offline Myen'Tal

  • Lazerous Penguin
  • Senior Member
  • *
  • Posts: 1761
  • Country: 00
  • Armies: Deepkin & Treefolk
Re: Nutty's Craftworld Eldar
« Reply #29 on: October 12, 2019, 09:47:21 PM »
Nice Battle Rep Summary, Nutty! You know the game is going to be rough when Nurgle brings nothing but daemon engines into the fight ;D. You did well with what you had against such a force.

I wish I could see more of the Rangers, though, I cannot really make out too much from the current images, though I wish I could!!!

I need to get back into the swing of things. Eidolon took a lot out of me ;D, but you're inspiring me to get back into it!
“Evil is relative…You can’t hang a sign on it. You can’t touch it or taste it or cut it with a sword. Evil depends on where you are standing, pointing your indicting finger.”
― Glen Cook, The Black Company

 


Powered by EzPortal